镭射纸印品表面油墨爆色问题研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Research on Surface Color Explosive in Laser Paper Printing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对镭射纸烟包印刷,根据标准的印刷条件及过程,使用IGT印刷适性仪在镭射纸标准样张上印制UV油墨,通过实验研究镭射纸墨层干燥程度、纸张含水量与爆色之间的关系。研究结果表明:墨层干燥程度和纸张含水量对镭射纸印刷品爆色的产生影响明显,墨层干燥程度越高,爆色越容易发生,含水量也必须控制在一定范围内;对于镭射纸的印刷,在保证墨层初干性的前提下,纸张含水量为8%、墨层干燥度在80%~85%之间最好,此时,镭射纸的爆色率最低。

    Abstract:

    For cigarette laser paper packaging printing, according to standard printing conditions and process, UV ink was printed on the standard specimen of laser paper using IGT printability tester. The relationship between ink drying degree and paper water content with color explosive of laser paper was experimented. Results showed that ink drying degree and water content had obvious effects on color explosive of laser paper, the higher degree of the ink drying, the more likely its appearance. The water content of laser paper should be controlled within a certain range, too. As to the laser paper printing, under the condition of ensuring the initial drying properties of the ink, the 8% content of water in paper and ink dryness of 80% ~ 85% would cause the lowest rate of explosive color.

    参考文献
    相似文献
    引证文献
引用本文

赵 欢,张 霞.镭射纸印品表面油墨爆色问题研究[J].包装学报,2016,8(4):40-44.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-03-31
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-10-26
  • 出版日期:
文章二维码