储存容器对重金属检测样品的影响研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

“十一五”国家科技支撑计划基金资助项目(2009BAD9B04)


Effect of Storage Containers on Detection of Heavy Metal Samples
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用电感耦合等离子体光谱法(ICP-OES),在一定条件下、不同的储存容器中,同时测定铅、镉、铬、镍、钴、锑、锌、砷8种有害物质的检测量与初始量的变化率。试验结果表明,不同材质的容器中,相同种类重金属的检测值和初始值的变化率不同;相同材质的容器中,不同种类重金属的检测值与初始值的变化率也不相同。综合分析,较适宜储存重金属溶液的容器材质为氟化乙烯丙烯共聚物。

    Abstract:

    The influence of storage containers on hazardous substances of sample was evaluated. Hazardous substances of heavy metal (lead, cadmium, chromium, nickel, cobalt, antimony, zinc and arsenic) were found in synthetic samples detected by inductively coupled plasma optical emission spectroscopy (ICP-OES) in different storage containers. The effect of materials of containers was evaluated by the change of detection value and initial value of hazardous substances. Results showed that the variation of the same type of hazardous substances was different when stored in different containers. Different kinds of materials of container were suitable for different kinds of hazardous substances. The most suitable material was Fluorinated ethylene propylene produced by foreign.

    参考文献
    相似文献
    引证文献
引用本文

张 丽,卢立新,董占华,刘志刚,唐亚丽.储存容器对重金属检测样品的影响研究[J].包装学报,2011,3(3):28-30.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2011-03-18
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-10-28
  • 出版日期:
文章二维码