管内流体动力清洗式传热强化元件的性能比较
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖南省教育厅基金资助项目(05C515),(06B024)


Performance Comparison on Strengthening Heat-Transfer Elements of Fouling Remove Automatically
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在试验比较的基础上,评价了传热管内传热强化幅度的大小、阻力性能及综合性能,结果表明:在雷诺数为8 000~43 000的范围内,流体动力自转式光滑螺旋扭带、斜齿螺旋扭带、平齿带和钢丝螺旋线的传热强化幅度分别为14 %、33 %、39.5 %和16.5 %;在Re低于10 000的范围,采用平齿带和斜齿螺旋扭带效果较好;钢丝螺旋线和光滑螺旋扭带在Re=12 500达到最佳;在Re高于10 000的广阔范围,选用钢丝螺旋线和光滑螺旋扭带更合理。

    Abstract:

    In view of evaluation of capability of heat transfer enhancement, flow resistance and comprehensive performance through experiments, the result shows that the heat transfer enhancement of self-rotating twisted strip, twisted strip with oblique teeth, straight strip with elliptical teeth and steel spiral are 14 %,33 %,39.5 % and 16.5 % respectively within the Re range of 8 000~43 000; twisted strip with oblique teeth and straight strip with elliptical teeth are better as Re for less than 10 000; steel spiral and twisted strip come to the best of performance at the Re of 12 500; steel spiral and twisted strip are more reasonable in the abroard range of Re with more than 10 000.

    参考文献
    相似文献
    引证文献
引用本文

易 伟,俞天兰,彭德其,李群松,向寓华,姚雪峰.管内流体动力清洗式传热强化元件的性能比较[J].湖南工业大学学报,2008,22(2):71-73.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2007-11-16
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-09-02
  • 出版日期: